Wavlink AC1200 wifi Extender Setup

Your wifi network or connection is improved by the wavlink WiFi AC1200 Extender Setup, allowing you to play games, stream movies, and view web series without interruption. With 4 external antennas, the wavlink WIFI Extender Setup provides unmatched WiFi coverage across your homes and places of business. Setting up a wavlink extender is quite simple. Due to the plug-and-play nature of the device, it can connect to any network in only 15 seconds. You can choose between the router, repeater, and access point modes in the wavlink AC1200 wifi extender setup depending on your needs. Keep in mind that when the mode is changed, the wavlink Extender must be reset or adjusted.

Wavlink AC1200 extender setup via manual method

You can complete the wavlink AC1200 Setup on Internet Explorer by following the steps indicated below:

First, put your router and wavlink wireless extension in the same space.
Ensure that at least 50% of the signals from your router reach the extension.
Now turn on both the extension and your router.
Check to see if the LED light is stable or solid green after a brief delay.
After opening the wifi settings on your laptop, desktop, or mobile device, connect to the wavlink ac1200 extender configuration.
The first time, there is no need to enter a password because they will automatically connect to your device.
After establishing a connection, they gave no indication that the internet was accessible before launching any web browsers.
Instead of typing http://AP.Setup, you can type 192.168.10 in the address field at the top. There will only be one page for login.
You must use “admin” as both your login name and password.
Enter the new extender setup password after choosing the extender you want to use to connect to your router.
Once you’ve finished setting it up, switch off your extender for 15 to 20 seconds before turning it back on.
Connect your device using the wavlink wifi range extender setup; the name is “SSID EXt” in your wifi list.

Note:- If you need any help regarding your wifi extender so contact our technician or visit the official website that is ap setup.

Wavlink AC1200 Extender Setup through web browser

When first setting up wavlink wifi extender with the browser, the following steps must be followed:

First, connect the power supply for your WIFI EXTENDER. Additionally, it is not necessary to connect in close proximity to the router in this situation.
Before turning on the LED indicator, which at this stage should be a solid green color, give the extender some time to properly ramp up.
After that, access the WIFI manager using a computer, laptop, or smartphone.
The network will eventually become unsafe, linking your extensions to the network it is a part of.
Your network connection has been established successfully. Open your favourite browser and go to the URL bar. The URL for the webpage must be copied and pasted.

How do i setup wavlink wifi AC1200 extender?

To configure your WiFi range extender through the AP, press the WPS button. To set up your new extender arrangement, heed the advice below:

Start by utilising an Ethernet wire to link your extension and router.
Wait until the LED light has stabilised.
Next, keep down the WPS button for 5 seconds.
After 15 to 20 seconds, the lights on both devices will start to flicker, signifying a successful connection.
You can put your new extender wherever you like utilising a range extender configuration now that it is disconnected.
Once you’ve entered the same password for both your router and the new extender settings, “SSID EXT” will appear in your wifi list.