How to Setup Rockspace WiFi Extender?

Want to set up your Rockspace WiFi extender? We’ll go over each and every step that will enable you to set up Rockspace with ease.

Rockspace has been leaving its mark on the extenders market for a while. Checking the steps for setting up a Rockspace WiFi extender setup can help you gain consistent internet connectivity if you have purchased one of the extender models from Rockspace to increase the WiFi coverage of your router.

Items Required for Rockspace Setup

You must have some resources available before beginning. They will make it simpler for you to set up the Rockspace WiFi extender if you have them in advance.

1. Make sure that your router is set up correctly.
2. a note of the Rockspace extender’s default web URL and login information.
3. For a seamless transition during the Rockspace setup procedure, have an Ethernet wire close at hand.
4. Ensure that your internet plan is not about to expire.
5. In the area where your router is already installed, see if there are any power outlets that are in good working order.
6. Once you have all the items listed above, continue with the Rockspace WiFi extender setup procedure.

How to Install WPS on a Rockspace WiFi Extender

There are several ways to set up a Rockspace WiFi extender. Additionally, using the WPS button is the simplest.

You must first make sure that your router permits the use of the WPS feature before beginning the Rockspace WiFi extender setup process through WPS. If so, follow these steps to easily set up a Rockspace WiFi extender:

• In the same room where your home WiFi router is located, plug in your Rockspace WiFi extender.
• Turn on the power outlet’s power switch, and the power LED on your Rockspace WiFi extender will begin to glow.
• On both your router and your Rockspace WiFi extender, press the WPS button.
• You will soon discover that the host router and your Rockspace WiFi extender have been paired.
• If you don’t have a WPS-compatible router or the following instructions didn’t work for you when setting up your Rockspace WiFi extender, move on to the next section.

Note:- If you need any help regarding your wifi extender setup so contact our technician or visit the official website that is ap extender setup.

Using re rockspace local, setup the Rockspace WiFi Extender

It is also possible to manually install a Rockspace WiFi extender. You must follow these instructions to finish the Rockspace setup procedure using the local Rockspace web address.

1. Once you’ve finished positioning your Rockspace WiFi extender close to the host router, turn it on.
2. The extender’s LED will eventually begin to illuminate.
3. Connect your host router to the Rockspace WiFi extender. A coaxial wire can be used to connect the two WiFi devices.
4. It is now time to open a web browser on your computer or smartphone and access the local web address for re rockspace.

Note: Double-check the site address before entering it into your browser’s address box to ensure there are no typos.

• Your Rockspace WiFi extender’s login screen will appear as soon as you press the Enter key.
• Enter the default password and username in the corresponding areas, then click “Ok” to continue.
• Once the aforementioned procedure is finished, you will be presented with the Rockspace setup wizard, which will prompt you with numerous on-screen instructions.
• Complete the manual Rockspace WiFi extender setup procedure using re rockspace local by carefully following the directions.
• Now that your Rockspace WiFi extender has been moved, you can have smooth internet connectivity.

Having trouble setting up Rockspace? Contact Us For Immediate Help!

Refer to rockspace local Not Operating?

Due to the re rockspace local not working issue, some customers experience difficulties during the Rockspace WiFi extender setup. If the same problem has affected you as well, all you need to do is check the troubleshooting section provided below.

1. Ensure that the cables connecting your router to the Rockspace WiFi extender are in place.
2. Make sure to access re Rockspace local using a modern web browser.
3. One of the causes could be that the website address was typed incorrectly. Therefore, make sure you entered “re rockspace local” accurately and without any types.
4. Your Rockspace WiFi extender may experience WiFi interference from neighboring equipment, which can also cause a similar rockspace local not functioning issue. Therefore, keep appliances like baby monitors, microwaves, refrigerators, etc. away from your extension.
5. Another possible cause is a cut in the Ethernet cable that connects the extension and router. As a result, only use a functional cable to connect the two devices.
6. The re rockspace local not functioning issue may also prevent you from finishing the Rockspace setup process if the power source you are using is not powerful. Choose a functional outlet for both your extender and your router.

Have you completed all of the troubleshooting tips? Can you now finish setting up Rockspace?

If so, we advise you to contact our technical experts for immediate help with setting up the Rockspace WiFi extender.